PCB level products

This section of our web site shows details of some of the PCB's we have designed and manufactured either for built to order equipment or for use in our own products. These are available for sale either as spares for Axon equipment or for use in your own products.

This site only gives a brief explanation of each board. If you need more details contact Axon directly.

USD 6000

• Display and controller unit
• 2 strain gauge inputs.
• 15 bit signed A/D converter.
• 2 line LCD driver (standard display)
• Axon 8 digit RED led display driver.
• RS 232/485 control port

8-Digit display board

• PIC based
• Serial control
• Up to 8 large display digits.

4 digit LCD display board

This board is designed to fit in a hand held case

• 4 digits
• Translucent LCD with backlight
• Serial control

Radio receiver and display driver - mark 2

Receiver to match the transmitter unit below and the display unit above.

• In circuit programmable
• Three button control of on/off and calibration of incoming readings
• E2ROM storage of parameters
• Small profile
• Display driver
• Serial data output
• Analogue output D/A port

For more system details see also radio systems

Radio transmitter and strain gauge measuring system

• 0.8 to 5.0 volts DC operation
• Direct strain gauge input (2mV/V typical)
• 150 meters radio range
• Encrypted radio transmission, to reduce interference.
• Extremely small footprint
• In circuit programmable

For more system details see also radio systems

5V RS232 converter

5v serial communication to RS232 or RS485. Fits inside a 9 way d-Type shell (as shown)

Digital potentiometer control PCB

This is a PIC based PCB with four digital controlled Pots on board. It is controlled with software (supplied separately) that allows up to 128 of these boards to be controlled from a single serial port on a PC. This is an ideal way to get PC based computer control of a piece of electronics which has a large number of potentiometers in the design, without changing the design!!

Please e-mail your requirements to Axon at sales@axoninstruments.com or print and fax to Axon at 44 (0) 1467 625235